Login Form
ANALOGUE PHOTO DETECTOR CODE CE.V100 - CE.LV100
The optical addressable detectors are certified by Certifying Body authorized, (BRE Global Limited & LPCB + VdS), in accordance with the standards EN 54-7:2000 + A1: 2002 + A2: 2006, EN 54-17:2005.
The production is carried out by applying a quality control system, which includes a series of rules regarding the construction of all the devices.
All analog-addressable devices are designed to communicate through completely digital protocol and are equipped with isolator against short circuits on the loop, in the standard version, without isolator in the Lite version.
The protocol allows an exchange of digital information at high frequency between the control panel and the device ensuring a rapid and secure response.
The detector provides information on the quality of the communication, performs a digital control to double-address and is equipped with a system and self-compensation of hardware / software.
It is possible to connect up to 240 points per loop.
The control panel is able to automatically detect and identify all points connected to detection circuits (loop), by interrogating all the possible addresses (1 to 240). All points are pre-programmed with a unique address, using the appropriate tool CE.VPU1000.
The addressable optical detector performs a continuous sampling of the air particles present in the area to be protected to provide, in the shortest possible time, the fire alarm.
The detector features high processing capacity and can efficiently analyze the state of the protected area ensuring an high immunity to false alarms.
It is a detector with a sophisticated technology.
The performance of the detector is enhanced by the integration of a special algorithm that automatically compensates for the dirtiness of the sensitive chamber, allowing for increased immunity to unwanted alarm conditions while maintaining a consistent level of sensitivity.
Each sensor is equipped with a two-color LED (red and green) positioned centrally in order to ensure a 360 ° visibility.
The fully symmetrical structure of the cap and of the optical camera ensure a good flow of air from all directions and provide an inherent immunity to ambient light.
The design "Double Dust Trap" provides protection from contamination by dust and by the external light, thanks to a special labyrinth for the entry of the smoke, delaying the need for maintenance without reducing the efficiency of the detector.
The external screen provides high protection against insects.
It also features a antiremoval device from the base - mechanical tamper.
To verify the correct operation of the sensor, all models can be tested after installation, software, through the control panel, or simply using a suitable magnet.
Cyclically, the sensors perform a complete test of all functionality.
The housing "Decorline" allows the use of detectors in rooms with special aesthetic requirements.