Login Form
ADDRESSED DIN-MODULES SERIES
SINGLE INPUT DIN RAIL MODULE CE.VMDI100
SINGLE OUTPUT DIN RAIL MODULE CE.VMDC100 - CE.VMDC120
INPUT / OUTPUT DIN RAIL MODULE CE.VMDIC100 - CE.VMDIC120
The series of din rail modules is a family of compact microprocessor controlled interfaces that allows monitoring and control of auxiliary devices.
The din rail modules are powered from the loop.
The addressable devices are designed to communicate through completely digital protocol that allows an exchange of information at high frequency between the control panel and the din rail module ensuring a rapid and secure response.
On the device is present a bi-color LED (red / green) that is activated by the control panel.
Rapid alarm and fault conditions.
Short circuit isolator
All addressable din rail modules are equipped with line isolator for short-circuit that controls the detection loop and that can also be activated by the control panel.
The provision of modules must follow the regulations recognized nationally and internationally. It's necessary to check the correct polarity of the connections referring to the connection tables for each model. The modules are equipped with female terminals, one end of line resistor of 27 ohms and a resistance of 10 kOhm alarm depending on the model.
The CE.VMDI100 is a SINGLE INPUT DIN RAIL MODULE that provides control of a normally open contact of a fire alarm or device supervised (eg. linear detectors not addressed, thermostat, probe anti-flooding, failure of a signaling additional power supply, etc..).
The input channel is supervised and identifies the conditions for normal / short circuit / alarm / open circuit.
The CE.VMDC100 is a SINGLE SUPERVISED OUTPUT DIN RAIL MODULE that provides control, through the closing of a contact, of an auxiliary device such as a tag or a sounder not addressable, an electromagnet for the closure of a fire door, etc. .
The single output module is powered from the loop and is based on a SPDT relay (contacts C, NC and NO).
The relay is normally disabled. It is activated through specific unit command.
The CE. VMDC120 is a DIN RAIL MODULE WITH RELAY OUTPUT , which provides 2 free contacts for control of auxiliary devices.
The CE.VMDIC100 is a DIN RAIL MODULE INPUT SUPERVISED AND OUTPUT SUPERVISED that includes in one device an input and an output supervised.
The input channel is supervised and identifies the conditions for normal / short circuit / alarm / open circuit.
The output channel is normally deactivated. It is activated through specific unit command.
The CE.VMDIC120 is a DIN RAIL MODULE WITH SUPERVISED INPUT AND OUTPUT RELAY that includes in one device a supervised input and relay output.