CONVENTIONAL HEAT DETECTOR CODE CE.S3500
Conventional heat Class P detectors are certified by Certifying Body authorized (BRE Global Limited & LPCB + VdS), pursuant to the standards EN 54-5:2000 + A1: 2002.
The production is carried out by applying a quality control system, which includes a series of rules regarding the construction of all the devices.
The thermal detector performs a conventional continuous sampling of the temperature variation of the area to be protected to provide in the shortest possible time the fire alarm.
The detector is provided with high processing capacity and can efficiently analyze the state of the protected area ensuring a high immunity to false alarms.
The unit controls the temperature through a thermistor circuit which provides electrical signals that allow thermal analysis of the environment, ensuring detection efficiency with a high immunity to false alarms.
Programmable to be heat fixed temperature or rate of rise.
In particular:
- CE.S3500/A1R detectors are class A1R which provides an intervention at a temperature of 58 ° C, temperature at the attainment of which the detector generates an alarm signal in the presence of very small increases in temperature. Also include a function rate of rise, which intervenes to high and sudden increases of the temperature of the air even below the normal ambient temperature of operation. Then act as detector at a fixed temperature "low" (58 ° C) and as a rate of rise.
- CE.S3500 / B detectors are class B which provides for an intervention at a temperature of 78 ° C, temperature at the attainment of which the detector generates an alarm signal in the presence of very small increases in temperature. Thus act as a detector at a fixed temperature "high" (78 ° C).
Since provide adjustment of the class in the field, through a special device CE.VPU1000, in case of need of variation between a type of analysis and the other, the detectors are of class P. The factory setting is the class A1R, switchable Class B field.
It 's a detector with a sophisticated technological content.
Each sensor is equipped with a red LED positioned centrally so as to ensure a 360 ° visibility.
It also features a tamper device from the base - mechanical tamper.
To verify the correct operation of the sensor, all models can be tested after installation, simply by using a suitable magnet.